YOU ONLY LIVE ONCE...MAYBE TWICE!
Weapons made from, you know, stuff.
Ok so here are the weapons I came up with, hope they're conventional:
1. Flamethrower:
- Spray can with flammable liquid (bug spray, air freshener, Axe, etc.)
- Matches. Lots of boxes of matches.
- Flexible (but still strong) wire.
2. Firecracker grenades:
- Very small, thin plastic bottles/containers.
- Firecrackers (with reasonably long fuses) [firecrackers should fit inside bottles]
- Lighter fluid/ gasoline (something along those lines).
3. Flaming arrows:
- Bowed stick/PVC/screw it, anything you can put into a bent shape.
- Reasonably thin metal rods (a lot of 'em)/thin lengths of wood, about a meter long.
- Flammable liquid (of course)
- Source of fire (matches, etc.)
- Thick silicone bands (cuz rubber bands suck)
[Duct tape should be used, and rods of metal/wood should be pointed]
4. Spear: (simplest)
- Broomstick
- Knife/knives
- Duct tape :D
5. Nokia phone.
I'm working on a few others, so this is it for now. If you can't figure out how any of these would work, ask me. I'll try to explain :P
Views: 1028
Replies to This Discussion
-
Permalink Reply by KOMRAD RHINO☭ on
-
i can feel ya there. but sometimes things cant be avoided.
-
Permalink Reply by Cher on
-
very true... ok gotta start working out. im 125 pounds, but i need more muscle...
-
Permalink Reply by Komrad Venessa Wicked☭ on
-
http://www.instructables.com/id/How-to-make-my-homemade-butterfly-k...
Step 1Materials
You will need:
-Angle Grinder with cutting wheel
-Metal, preferably an old circular saw blade
-Various sand paper and files
-Drill
-2 Sharpies
-2 Screws or bolts
-Glue
-Pliers
-Cup of waterStep 2Designing the blade
With the blade, you must measure and think, is this enough room to fit the handles? You can design any type of blade you want, cut it out on a piece of paper and trace it on to your metal. Then cut it out with your angle grinder. Grind away all the burs. Dunk it in water. The grinder does not get the blade really hot to where it loses its edge holding temper.Step 3Drill your holes in the blade
Just try and drill your holes the best you can with an idea of the gap you will have if you go to far away. Drill the holes in the blade about one-eighth of an inch inwards of the side. DRILL IT!Step 4Preparing the Sharpies
Now you want to get 2 sharpies like the one below. Start by getting some pliers and removing the tip and pull out the black part where its at. Remove the foam ink tube and dispose. Glue the part you just pulled out back in and glue the cap on to that.Step 5File and Sand your blade
You can sand your blade to your own degree. Make it sharp, dull or whatever you want.Step 6Cutting the sharpies
With your angle grinder or dremel, cut a straight line right down the side, dont go fast or you will melt it. File with needle files.
Drill a hole directly in the end of your sharpie, the blunt end,not the cap. Connect the blade to your sharpies with bolts, you should understand it its pretty easy.
-
-
well, that seems amusing enough to build.... but i think ill stick with the several knives i have at my disposal just lying around my kitchen :)
- ‹ Previous
- 1
- 2
- Next ›
Wicked Books
Our Sponsors
View more gifts at Zazzle.
WICKED ZOMBIES members appreciation.
The WICKED member who has unyielding Dedication and Loyalty to the KOMRADZ:
The WICKED member who has Outstanding Constancy:
The WICKED member who Contributed the most Original Zombie Discussions and Replies:
They will receive a WICKED ZOMBIES Goody Box with Wicked Treats.
Blog Posts
Been Awhile, BUt I'm still Alive
Greetings Everyone, Well it's been awhile. As things go, life carries us all in different directions from time to time but you always find your way home sooner or later. Well, life ain't all fun and games, but right now, things are going good. I have restarted my writing on my book again, and as I learn more about about some of the ROle-playing games I have gotten into, I am seriously thinking about rying to create an actual Zombie Survival Role-playing game. But have not set any time…
ContinuePosted by Jessie W. Garrett III on May 22, 2024 at 12:32am — 1 Comment
© 2024 Created by Komrad Venessa Wicked☭.
Powered by
