YOU ONLY LIVE ONCE...MAYBE TWICE!
pipe knife zombie killer
this is a cool knife that can be made fairly easily and i think this would be great for getting into the skull. maybe not as wide a pipe as he used but looks like something that would just go through the skull like butter.
Views: 1342
Replies to This Discussion
-
Permalink Reply by KOMRAD RHINO☭ on
-
That's the beauty of pipe knives. They can be made from any pipe from galvanized ( if you got the time to use a hammer and heat forge) to PVC plastic piping. The thick PVC can easily punch through a human skull. But if all you can get is the thinner stuff. You may want to consider the temple, ears or eyes for the brain shot. But being either can be found with the greatest of ease. These make great materials for improvised stabbing weapons.
-
-
They can also by themselves make a great spear to.
-
-
Even a 3 foot pipe can make a good spear. Just sharpen the tip the way this guy did for the knife.
-
-
the only thing missing is the cross guard and pommel. lol.
-
Permalink Reply by Komrad Venessa Wicked☭ on
-
I found this weapon and it looks like a zombie killer.
The Lobotomizer or 'Lobo' was a melee weapon in Max Brooks' World War Z.
The Lobotomizer it mainly consisted of the components of a GI shovel with two axe blades on either side. It was designed by the U.S. Marine Corps to combat the zombies, but could be equally useful in real life. Simply take a flat shovel, preferable no larger than two feet long, and weld two axe blades on either sides. It can be used for piercing, smashing, and slashing, though the latter works somewhat ineffectively.
-
Permalink Reply by saint.357 on
-
heres a good one too.
Pummel Pipe Hand Hammer
PUMMEL PIPE HAND HAMMER: For those of you out there looking for a close-range Anti-Zombie weapon or single hand tool, check out the Pummel Pipe Hand Hammer. Nearly duplicate in design to the original Pummel Pipe, the Pummel Pipe Hand Hammer is still a beast in its own right.The one-handed operation of the Pummel Pipe Hand Hammer allows for quick and easy action on a larger number of targets within a shorter amount of time. While the Pummel Pipe Hand Hammer lacks in over-all crushing power compared to its big brother, it makes up for it small stature with speed and a lighter carry weight.
Tools: Pipe wrench, steel wool, adhesive (optional, but recommended), and a sharp knife.
Materials: 3/4″ diameter 12″ long steel pipe, two 3/4″ threaded connections, two 3/4″ end caps, one 3/4″ to 1/4″ adapter, one 1/4 squared plug, 3/4″ T adapter, and 550 paracord (optional for wrapping).
Step 1. If needed, clean the pipe by scrubbing it with steel wool. This helps remove grime and rust that may corrode the metal or eat away at the optional paracord wrapping that comes later.
Step 2. Piece together the head of your Pummel Pipe, making sure to tighten down each piece as much as possible without stripping the threads. We recommend that you secure each piece with an application of sealant/glue (like loctite) as you go; this will increase the longevity and lower the risk of future maintenance for the Pummel Pipe. If you choose to use adhesive, please wait until it has fully set before moving on to the next step.
Step 3. Secure the now completed head to the main body of the pipe, tightening it down as much as you can without stripping the threads. We recommend that you DO NOT use adhesive here. Leaving this attachment removable allows experimentation with different configurations for the weapon, and it allows for easy replacement of the main body, should the need ever arise. Place the end cap on the open end of the pipe and you’re ready to wrap the handle with paracord.
Step 4. Adding a paracord wrap to your Pummel Pipe will increase the grip and help deaden the shock to your hands and arms when you get a good solid hit.
Run a length of cord from the end to the head of the pipe, leaving about 2 inches at the tip of the handle. Carefully wrap the remaining cord down the length of the pipe, covering the length of cord you previously laid out. Do this until the main body is fully covered. Cut away the remaining paracord, leaving about 2 inches to secure it with. Tie the two loose ends together, and seal them with a lighter, hot stove burner, or other high temperature heat source.
Step 5. You now have a Pummel Pipe Hand Hammer for all the bashing, smashing, and crashing you can handle.
Mods: Customizing and making modifications to your personal Pummel Pipe Hand Hammer is an important part of the build. Make sure that you’re using a length of pipe that matches your abilities and body-size, a color of paracord that fits your needs and of course any changes to the head of the hammer that you would like.
Make it a Dead-Weight – While the paracord wrap will help deaden the sometimes hand-tingling force of a heavy strike to a hard surface, adding sand or an alternate fine-grain material into the main body of your Pummel Pipe will ease the shock immensely as well as increase the load behind each swing.
Make it an Emergency Kit – adding a few basic supplies like some fishing gear, small sewing kit or even a fire-starting kit to the empty handle of your Hand Hammer is a great way to stay some extra supplies without the hassle of digging around in your pack for them.
Simply place the contents of your kit into a plastic bag and shove the bag inside the handle. This helps keep everything inside nice and dry, in place and easy to get to should the need arise.
All of these steps can be done without the use of power-tools, making this DIY or Die Trying project easy to do, even after a horde of zombies knocks out the local power station. So, with readily available parts, super easy build, and devastating force, the Pummel Pipe truly is one hell of an anti-zombie melee weapon. After running it through the ringer, you’ll see that, when made correctly, it can last you through a lifetime of use… even if you spend half the time warding off zombie attacks and other survivors. The Pummel Pipe has been a great too for us here at Zombease HQ, easily falling and tearing through materials as we continue to put it to the test and discover its limits.
Still plenty capable of crushing a Zombie head, the Pummel Pipe Hand Hammer is a great addition to a Bug Out Bag for people on the move or a low-key tool to keep around the house.
my mod to this would be to make it out of pvc pipe. zombie go boom already proved pvc can kill a zombie so it will make for a much lighter weapon that can also float. so it can serve a few different uses.
-
-
i like this design. i would want a longer pipe/handle though. give it more momentum and power to the blow. it would also give it the strength of force a mid-evil war hammer would have. think i might try my hand at this when i get some time.
-
-
then you want the original,
Pummel Pipe Melee Weapon
PUMMEL PIPE: The benefits of having a well-made melee weapon on hand can’t be argued against. Great for semi-close combat, powerfully crushing blows, and even a bit of stealth; the Pummel Pipe is a great tool to have at your disposal.
While we chose to make ours with 3/4″ diameter by 24″ long steel pipe, you should use what fits your hand the best. But keep in mind that the bigger the gauge and longer the length of the pipe, the heavier it will be. In addition to customizing the gauge and length, you can alternate and exchange the head of this melee weapon as you see fit… as long as you don’t use an adhesive to permanently affix it to the main body.
We chose the parts we did because they are common, easy to access, low cost, and can likely be found in scrap-yards, homes, and hardware stores alike. After testing out this homemade Zombie-basher on a series of objects and materials, we discovered that it isn’t just great for dispatching Zombies. The Pummel Pipe works really well for shifting debris, taking down a wall, breaking windows, gaining entry to a building, or even as a good old fashioned hammer.
Tools: Pipe wrench, steel wool, adhesive (optional, but recommended), and a sharp knife.
Materials: 3/4″ diameter 24″ long steel pipe, two 3/4″ threaded connections, two 3/4″ end caps, one 3/4″ to 1/4″ adapter, one 1/4 squared plug, 3/4″ T adapter, and 550 paracord.
Step 1. Clean the length of pipe with steel wool. This helps remove grime and rust that may corrode the metal or eat away at the paracord wrapping that comes later.
Step 2. Piece together the head of your Pummel Pipe, making sure to tighten down each piece as much as possible without stripping the threads. We recommend that you secure each piece with an application of sealant/glue (like loctite) as you go; this will increase the longevity and lower the risk of future maintenance for the Pummel Pipe. If you choose to use adhesive, please wait until it has fully set before moving on to the next step.
Step 3. Secure the now completed head to the main body of the pipe, tightening it down as much as you can without stripping the threads. We recommend that you DO NOT use adhesive here. Leaving this attachment removable allows experimentation with different configurations for the weapon, and it allows for easy replacement of the main body, should the need ever arise. Place the end cap on the open end of the pipe and you’re ready to wrap the handle with paracord.
Step 4. Adding a paracord wrap to your Pummel Pipe will increase the grip and help deaden the shock to your hands and arms when you get a good solid hit.
Run a length of cord from the end to the head of the pipe, leaving about 2 inches at the tip of the handle. Carefully wrap the remaining cord down the length of the pipe, covering the length of cord you previously laid out. Do this until the main body is fully covered. Cut away the remaining paracord, leaving about 2 inches to secure it with. Tie the two loose ends together, and seal them with a lighter, hot stove burner, or other high temperature heat source.
Step 5. You now have a Homemade Pummel Pipe for all the bashing, smashing, and crashing you can handle. Due to its moderate weight, we recommend using the Pummel Pipe primarily as a two handed weapon, and practicing good body mechanics to get a nice powerful swing out of it.
Mods: Customizing and making modifications to your personal Pummel Pipe is an important part of the build. Make sure that you’re using a length of pipe that matches your abilities and body-size, a color of paracord that fits your needs and of course any modifications to the head of the hammer that you would like.
Make it a Dead-Weight – While the paracord wrap will help deaden the sometimes hand-tingling force of a heavy strike to a hard surface, adding sand or an alternate fine-grain material into the main body of your Pummel Pipe will ease the shock immensely as well as increase the load behind each swing.
All of these steps can be done without the use of power-tools, making this DIY or Die Trying project easy to do, even after a horde of zombies knocks out the local power station. So, with readily available parts, super easy build, and devastating force, the Pummel Pipe truly is one hell of an anti-zombie melee weapon. After running it through the ringer, you’ll see that, when made correctly, it can last you through a lifetime of use… even if you spend half the time warding off zombie attacks and other survivors. The Pummel Pipe has been a great too for us here at Zombease HQ, easily falling and tearing through materials as we continue to put it to the test and discover it’s limits.
-
-
Now THATS more like it! The hammer of the gods. Lol
Wicked Books
Our Sponsors
View more gifts at Zazzle.
WICKED ZOMBIES members appreciation.
The WICKED member who has unyielding Dedication and Loyalty to the KOMRADZ:
The WICKED member who has Outstanding Constancy:
The WICKED member who Contributed the most Original Zombie Discussions and Replies:
They will receive a WICKED ZOMBIES Goody Box with Wicked Treats.
Blog Posts
Been Awhile, BUt I'm still Alive
Greetings Everyone, Well it's been awhile. As things go, life carries us all in different directions from time to time but you always find your way home sooner or later. Well, life ain't all fun and games, but right now, things are going good. I have restarted my writing on my book again, and as I learn more about about some of the ROle-playing games I have gotten into, I am seriously thinking about rying to create an actual Zombie Survival Role-playing game. But have not set any time…
ContinuePosted by Jessie W. Garrett III on May 22, 2024 at 12:32am — 1 Comment
© 2024 Created by Komrad Venessa Wicked☭.
Powered by
