YOU ONLY LIVE ONCE...MAYBE TWICE!
How To Turn A Spoon Into A Survival Weapon
By Sean Watkins on July 10, 2014
Those interested in exploring the endless amount of survival bow techniques will probably agree that one of the hardest parts of constructing your own survival bow is finding the right material for an effective arrowhead when on the move.
Luckily, almost any multitool or camping combo tool has a spoon attachment, which can be turned into a very effective and deadly arrowhead. I think we can all agree, in a survival situation, I would need a tool for hunting before I ever needed that spoon to eat food I don’t even have. After all, we are humans and have hands and teeth for tearing at the food we catch later.
What is the big deal with having some broadhead arrowheads in your bug out bag? The man with a broadhead is usually eating opposed to the man with a simple sharpened stick who is usually laying hungry. The sharpened stick/small arrowhead options only leave small entry wounds, which are likely to stop bleeding before you track the animal down. The animal might still die from internal damage from the arrow, but you wont be able find it in time for dinner without a blood trail.
via Bowhunter-ed
Hunting with broadhead arrowheads are highly illegal in a few U.S. states, and considered “poaching” when hunting because of the effectiveness they have with leaving a large bleeding wound. This is why a survivalist needs these in their bug out bag. I’ve seen these spoon broadheads slice through heavy duty 5 gallon plastic buckets, an awesome show of how these are great for slicing through thick hides and muscle with ease.
via hunting 101
A great cause I can show you to prove my point is the story of a wild crane that was shot through the body with a carbon arrow that had a field point tip. The arrow was so non-effective, the bird survived for over a week before wildlife aid group could find it, catch it, and remove the arrow. The bird made a full recovery, but if it was a broadhead, that bird would have be on someone’s dinner table.
One thing to keep in mind, though: If you are out in the field without any power tools, don’t waste your time (and life-saving energy reserves) trying file down an arrow shape out of the spoon. I would just leave the spoon whole, hammer it down flat, then file the edges sharp with a flat-ish stone, just like a prison shank. This will give you a very effective oval egg-shaped broadhead, similar to the effective oval-shaped stone heads used by early man. Save that energy to use those arrows heads and HUNT!
Don’t have a Survival Bow? You can also just split the end of a long stick and use these as spear heads. They are a versatile tool to keep in the bug out bag. The edges are knife sharp, and can even be fashioned to a short branch for a hand held dagger.
DON’T LIMIT THEIR USE TO JUST ARROWS!
Supplies:
Metal spoon (maybe even a fork, or other scrap metal)
Plumber’s Torch (or small camp fire, camp gas stove, butane lighter, etc.)
Hammer (or a rock next to the camp fire)
Rotary tool with cutting/grinding bits (optional)
Workbench vice, with anvil surface (optional)
Sharpie pen (optional)
These are tools we used, but that doesn’t mean you need them to get the job done. Fire and rocks will do too!
Step 1:
Light your plumber’s torch and heat your spoon end, holding it with a pair of heavy duty pliers because it will get to be a red hot forging temperature. Then use the anvil surface on your vice, or any hard flat surface, to forge down the spoon flat.
Repeat the process of heating and hammering, until the spoon is totally flat to provide an arrow that slices through the air. Leaving in that curve of the spoon head even a little would act as a rudder and take your arrow way off course.
I also forged down a one inch section of the spoon neck, flattening it to same thickness as the spoon head. This makes it wider to cut in notches later, and also makes it so the section of the arrowhead in the arrow spine is not too thick to prevent arrows from splitting.
Heating our spoon with a plumber’s torch to bring it to a red hot forging temp.
Finished forging the spoon down flat and drawing the metal out down the handle.
Step 2:
You can freehand-cut the arrow if you want, but if you have a sharpie handy, use it to draw out the broadhead shape you wish on the arrow. Then, using your rotary tool, cut the shape out, and grind the edges to form a blade tip.
Detach the spoon from the multitool or cut off the excess of the spoon handle, then file a few notches along the neck of the spoon handle. This part will go down in the wood arrow spine, and the notches will catch the string binding you will put on later to keep the arrow head in place.
We start by cutting with cutting wheels, then get into detailed shape with grinders.
We use the edge of a cut off wheel to make a few binding notches.
Step 3:
You can use a mini knife sharpener or traditional wet stone to give the arrowhead that razor sharp cutting edge. Below also shows the less difficult version with an oval-shaped broadhead that I didn’t cut into an arrow shape. The arrow shape advantage over the oval, is the back barbs, to cause more damage if the animal attempts pull out an arrow.
Sharpening is obviously the best step to make sure you have max penetration of the arrow head, but it’s not completely necessary. Even with no sharp edge, it still would make a very effective arrowhead at the high speeds arrows achieve.
The 99c store kitchen knife sharpener makes fast work of sharpening the edge to be razor sharp.
The finished product…..2 versions of a highly effective arrowhead.
I like to keep at least 4 or 5 of these easy and cheap heads in my bug out bag, with a roll of duct tape for fletching (which gives the arrows stability, we’ll cover that in another post). Then I know I can just find the wood for spines and bow while I am on the GO! The most effective way to use these is to just split a wood dowel one end, and bind the head in between the two halves with some type of binding to reinforce them.
Views: 1096
Replies to This Discussion
-
Permalink Reply by KOMRAD RHINO☭ on
-
LMAO!!! Guess it could go that direction. Wanna QUICK way to accomplish the deed. DEEP FRY a turkey near the house. My ex-father inlaw from my first marriage cooked his to close to the garage in the turkey fryer. Managed to cook the turkey and half the garage before the fire department got there. What a scene that was. Guess nobody told him to thaw the bird before putting it in all that hot grease. LMAO!!! My ex-mother inlaw INSISTED on baking the turkey from then on.
-
Permalink Reply by Komrad Mercenary☭ on
-
Now I have a craving for some turkey and cranberry sauce.
-
Permalink Reply by saint.357 on
-
now im wondering if i could use an axe spray can instead of a blow torch like this guy did to melt pewter.
-
-
I like this guys work. I just don't agree with his boasting how the needed goods were bought after the security point. There is no need to risk innocent lives that way.
-
Permalink Reply by Komrad Scarlet Zombie☭ on
-
How can axe spray be used as a blow torch?
-
-
Light it on fire and use. Just not sure if it gets hot enough to work metal.
-
-
Where is axe spray in the airport? I have never seen any but will be on the look out now.
-
-
It's in the duty free shop. They sell them and other spray fragrances there. The airport is like a self contained city. If it were not so hard to secure as a whole. I would say take one of those private during a zpoc.
-
Permalink Reply by Komrad Gas Mask Killer☭ on
-
i would think the sprays would be banned from the airports. You learn something new everyday.
-
-
as long as they meet their liquid measurement requirements. they sell it. you can save yourself at least $5 a pop on the alcohol by going to the state liqueur store and buy the same little bottles there and only pay less then a couple of dollars for them. anything bought at an airport is like way over priced. reason being they know you will want it. anything from colognes and perfumes to food and drink. as a result. if you got the change to throw around. they got the disease you desire. lol. one needs to eat. so McDonalds in an airport will charge $1.50 for what is normally a .99 hamburger. and if you want a 20oz throw away? be prepared to be charged enough to almost buy a 2ltr bottle in Walmart. supply and demand.
-
Permalink Reply by Komrad Zombie Slayer☭ on
-
Wow that just blows my mind!
-
-
Yup. They are basically self contained cities. If it were not so hard to seal one off during a zombie outbreak. They would be an ideal place to capture and hold up in. At least five years supply of food and water. And that's only for the planes mind you. Add the restaurants to that and the time spent there could be almost endless. And being TSA is a virtual private army for the airlines. They would have weapons and ammo to help keep it if the airport could be secured. There would be no need to send raid parties unless you wanna stay on top of the whole food/water thing. As far as sleeping goes. There may be no beds. But it would be no different then a camp out. Just no need for the fire. And power would be no problem either. They run on their own circuit board and have generators. A virtual paradise if it can be taken and kept.
- ‹ Previous
- 1
- 2
- Next ›
Wicked Books
Our Sponsors
View more gifts at Zazzle.
WICKED ZOMBIES members appreciation.
The WICKED member who has unyielding Dedication and Loyalty to the KOMRADZ:
The WICKED member who has Outstanding Constancy:
The WICKED member who Contributed the most Original Zombie Discussions and Replies:
They will receive a WICKED ZOMBIES Goody Box with Wicked Treats.
Blog Posts
Been Awhile, BUt I'm still Alive
Greetings Everyone, Well it's been awhile. As things go, life carries us all in different directions from time to time but you always find your way home sooner or later. Well, life ain't all fun and games, but right now, things are going good. I have restarted my writing on my book again, and as I learn more about about some of the ROle-playing games I have gotten into, I am seriously thinking about rying to create an actual Zombie Survival Role-playing game. But have not set any time…
ContinuePosted by Jessie W. Garrett III on May 22, 2024 at 12:32am — 1 Comment
© 2024 Created by Komrad Venessa Wicked☭.
Powered by
